Commercial Solar
A commercial property runs on its own schedule and its own loads — guest cabins at a campground, office equipment and air conditioning at a business, common-area meters at a rental property. Commercial solar has to be sized to that real usage, fit to the building or the land, and installed without shutting the business down. For properties across San Luis Obispo County, from the inland heat of North County to the salt air on the coast, we plan the system around how the property actually operates.
Sizing for Business Energy Use
The first question on a commercial install is not how many panels fit — it is what the property actually uses. We pull the real usage history behind the meter, look at peak demand and seasonal swings, and size the system to the loads that drive the bill. A business with heavy daytime air conditioning is a different project than a campground with evening guest peaks, and a rental property with common-area meters is different again. We plan to the actual usage and the actual rate structure, not a generic system size, so the array offsets what it realistically can instead of sitting oversized or undersized.
Roof and Ground Mount Options
A flat commercial roof or a carport can take a roof array; a property with open land — like a campground or a rural business — can take a ground mount that gives you the best orientation and tilt for production. We look at the building, the available land, the shading, and the electrical service, then compare roof versus ground mount honestly so you choose on the facts. Some properties are a clear roof job, some are a clear ground job, and some could go either way. We lay out the tradeoffs — land use, roof penetrations, service access, and visibility — instead of defaulting to one approach.
Keeping Disruption to the Business Low
The whole point of commercial solar is to lower your operating costs — not to shut you down while it goes in. We plan the work around your hours of operation: phasing the installation so the building stays in service, scheduling the electrical cutover for after hours or a slow day where it helps, and keeping the site clean and safe throughout. The roof work, the trenching for a ground mount, and the panel cutover all get sequenced so the business keeps running. A commercial property cannot afford the downtime that a sloppy, uncoordinated install creates, and we schedule the job accordingly.
Inspections Stay Honest
California law (Business and Professions Code section 7197) bars a home inspector from doing repair work on a home they inspected within the past 12 months. We never use an inspection to sell you work. Our inspection findings stay objective, and our commercial installations stand on their own.
What's Included
A commercial system sized to your real usage and planned around your hours of operation:
Who This Is For
Local businesses
You run a business in San Luis Obispo County with a real utility bill and a roof or land that can hold an array.
Rental property owners
You own rentals with common-area or house meters and want to offset the operating costs.
Campgrounds and hospitality
Guest cabins and common facilities drive a heavy evening load, and you have open land for a ground mount.
Properties that cannot go dark
You need the install phased around your hours so the business keeps running while the work goes in.
How It Works
Book
Schedule by phone or form. We talk through your usage, your roof or land, and your hours of operation.
Assess
An on-site look at the building, the electrical service, the meter, and the loads that drive your energy use.
Plan
We size the system to your real usage, choose roof or ground mount, and phase the work around your schedule.
Install
Clean, code-compliant electrical work with the cutover planned to keep the business running.
Commercial Solar FAQs
What kinds of properties do you do commercial solar on?
We work on small to mid-size commercial properties across San Luis Obispo County — businesses, rental properties, campgrounds, and other commercial buildings where the roof or the land can hold an array. The common thread is a real utility bill driven by real usage, whether that's guest loads at a campground, office equipment and HVAC at a business, or common-area meters at a rental property. We size to the actual usage behind the meter rather than a generic system size, and we look at the building and the site to see what actually fits.
How do you size a commercial solar system?
We start with your real usage history — the kilowatt-hours and the demand charges behind the meter — and size the system to the loads that actually drive the bill. A business with heavy daytime air conditioning needs a different array than a campground with guest cabins and evening peaks. We look at peak demand, seasonal swings, and the rate structure to plan a system that offsets what it realistically can. We will not hand you a one-size number and call it a system; the right size is the one matched to your usage and your roof or land.
Can you do roof mount or ground mount for a commercial property?
Either one, depending on the site. A flat commercial roof or a carport can take a roof array; a property with open land — like a campground or a rural business — can take a ground mount that gives you the best orientation and tilt. We look at the building, the available land, the shading, and the electrical service, then compare roof versus ground mount honestly so you choose on the facts. Some properties are a clear roof job; some are a clear ground job; some could go either way, and we lay out the tradeoffs instead of pushing one.
How do you keep the installation from disrupting my business?
We plan the work around your hours. That means phasing the installation so the building stays in service, scheduling the electrical cutover for after hours or a slow day where it helps, and keeping the site clean and safe while we work. The roof work, the trenching for a ground mount, and the panel cutover all get sequenced so the business keeps running. The point of commercial solar is to lower your operating costs, not to shut you down while it goes in, and we schedule accordingly.
Why does the electrical work matter so much on a commercial install?
A commercial solar array is a real electrical addition to your building — not a bolt-on. It needs correctly rated breakers, a clean connection to your service panel, conduit runs done to code, and a cutover that does not leave you dark. Undersized or sloppy panel work can trip offline under load or fail inspection, and a commercial building cannot afford the downtime. Because this is genuine electrical work, doing it right — with a state certified electrician on the job — is what separates a system that performs from one that just exists.
Do you serve commercial properties outside of Paso Robles?
Yes — across all of San Luis Obispo County, including Paso Robles, Atascadero, Templeton, San Miguel, San Luis Obispo, Morro Bay, Cambria, Los Osos, Arroyo Grande, Pismo Beach, Grover Beach, and Nipomo. Whether you run a business inland where the heat drives heavy air conditioning loads or a campground on the coast where salt air and fog are the concern, we plan the system for where your property actually sits. Traveling outside the county depends on the size of the job — give us a call and we'll let you know.
Financing Available for Qualified Buyers
Subject to credit approval.
Already Have a Solar Quote? We'll Take 10% Off.
Bring us any qualified solar quote and we'll take 10% off. Call for details.
Serving Paso Robles and All of San Luis Obispo County
Interactive Google Map centered on Paso Robles, our home base. We install commercial solar throughout San Luis Obispo County, from North County to the coast. No residential street addresses are shown.
Owner operated • Open 7 days, 7:00 AM – 5:00 PM • Serving San Luis Obispo County and surrounding cities.
Inquire About Commercial Solar
Owner operated across San Luis Obispo County. Sizing for your real business loads and a low-disruption install.
Lower the Energy Bill on Your Commercial Property
Speak directly with your installer and plan a commercial system sized to your usage and your hours, anywhere in San Luis Obispo County.